Pump Settings

Refer to the bottom of this page for Software Revision details.

Software Version:
Pump Model
Tool

Dip Switch

	1	2	3	4	5	6	7	8
A
B
C
D
E
F
G
H

Dip SW

Meaning

BP & MP Drooping

	Alarm Level	Rotation Speed (Kmin-1)	Delay Time (s)
BP	Warning
BP	Alarm (Trip)
MP	Warning
MP	Alarm (Trip)

Heaters

Heater #

Heater Name

Target Temp. (° C)

Flow Rate (slm)

Target1 Temp. (° C)

Timer1 (min)

Target2 Temp. (° C)

Timer2 (min)

Software Revision

30-Jun-2021: EVMK0111_ST028 HT4 temperature changed from 190 to 200'C
28-Jun-2021: Std Tsurugi EST801WN-B3ME-CHN latest software version EST40103_ST372 to replace EST40103_ST371
23-Jun-2021: Added OTB settings, latest software version - EVMK0111_ST028
18-Aug-2021: Eugene requested EST801WN-B3ME-CHN hot N2 settings to be original 200'C @ 100slm (Updated ST371, ST372, ST059)
10-Dec-2021: Std Tsurugi EST40103_ST384 for CIP-B2 (BP speed reduction + Hot N2 flow reduction), added "SP-2" and "flow high2" set point table.
16-Dec-2021: Std Tsurugi EST40103_ST384 for CIP-B2 (BP speed reduction + Hot N2 flow reduction), "SP-2" changed from 50slm to 100slm.
15-Jun-2022: Adv Tsurugi EST40103_ST399 for MP casing temp high set point - warning from 245'C to 255'C, alarm from 255'C to 265'C.
25-Aug-2022: Std Tsurugi EST40103_ST384 - change BP drooping warning delay time from 60s to 0s.
10-Nov-2022: Altus Halo HX (Dogwood) EST40106_ST062 - new setting table for Dogwood EV-M505SF-BME-CHN only (do not use for Lam Striker).
1-Dec-2022: Altus Halo HX (Dogwood) EST40106_ST062 - Revised BP casing temp control set point from 115'C to 105'C.
22-Mar-2023: Std Tsurugi EST40103_ST384 - change MP drooping warning delay time from 0s to 60s.
18-May-2023: Std Tsurugi EVM40100_ST268 / ST275 - Added EKKI/ITH HT1 & HT2 temp = 140°C, NITRIDE 190°C.
10-Aug-2023: Std Tsurugi EST801WN ITH BP/MP Drooping Alarm set point change from 1k to 3k.
25-Aug-2023: Adv Tsurugi EV-M801VB-T (OTB) Heater7 & Heater8 timer1 change from 120 to 240 minutes. Revert to 120 mins because only 17 pumps are affected.
5-Oct-2023: Dogwood EV-M505SF-BME-CHN EVM40106_ST062 - Revised MP drooping warning set point from 5k to 3k (approved by Han Yong).
22-Jul-2024: Std Tsurugi EST40103_ST384 - dip switch E5 = off, standardized with EOR ESI.
29-Oct-2024: Std Tsurugi EST40103_ST384 - dip switch D5 = on (enable oil level switch).
29-Oct-2024: Std Tsurugi EST40103_ST399 - dip switch C6 = on (enable oil level switch).